Details

---

Product Introduction

The AUDAC ANI44XT Dante™ Audio Network Interface is a professional 4-input / 4-output digital audio networking module designed for integration into compatible AUDAC WaveDynamics™ amplifiers. It enables seamless connection between the amplifier and a Dante™ or AES67-enabled AV network, allowing high-quality digital audio to be transmitted between mixers, microphones, media players and other networked audio devices.

With 48 kHz / 24-bit audio quality, ultra-low latency and compatibility with standard 100 Mbps or Gigabit Ethernet infrastructure, the ANI44XT provides a reliable and scalable solution for commercial and professional audio installations.

Product Description

The AUDAC ANI44XT upgrades compatible WaveDynamics™ amplifiers with four Dante™ network inputs and four Dante™ network outputs. Once installed, the amplifier can exchange bidirectional digital audio with other Dante™-compatible equipment through a standard IP network.

Its plug-and-play network architecture supports automatic DHCP configuration, simplifying installation without requiring dedicated audio cabling between every device. Audio routing can be configured through a clear graphical interface, making it easy to distribute signals across different rooms, zones and audio systems.

All four input and four output channels can operate simultaneously at 48 kHz / 24-bit resolution, with selectable low-latency performance of approximately 2 ms or 5 ms, depending on the network configuration and traffic.

The ANI44XT also supports AES67, AUDAC Touch™ and TouchLink™, providing improved system integration and flexible control within modern AUDAC audio installations. Its RJ45 network connection is EtherCON-compatible, allowing either standard RJ45 cables or rugged professional EtherCON connections to be used.

The ANI44XT is supplied as a complete installation kit with the accessories required for integration into the amplifier chassis. Installation should be carried out by a qualified technician.

Key Features

• Professional Dante™ audio network interface
• Four digital audio input channels
• Four digital audio output channels
• Designed for compatible AUDAC WaveDynamics™ amplifiers
• Bidirectional audio transmission across a standard IP network
• Dante™ and AES67 protocol compatibility
• Supports AUDAC Touch™ control
• Compatible with TouchLink™ technology
• High-quality 48 kHz / 24-bit digital audio
• Ultra-low latency of approximately 2 ms or 5 ms
• Simultaneous operation of all input and output channels
• Works with standard 100 Mbps and 1 Gigabit network equipment
• Automatic DHCP network configuration
• Simple graphical audio-routing interface
• RJ45 Ethernet connection
• Compatible with rugged EtherCON network connectors
• Improved power-supply design for better resistance to noise and interference
• Low power consumption of only 1.5 W
• Compact internal amplifier-mounted design
• Supplied as a complete installation kit

Technical Specifications

Professional Audio Solutions

Corporate Offices and Meeting Facilities

Connect microphones, digital mixers, conferencing systems and multiple audio zones through the existing IP network. The ANI44XT reduces analogue cabling while providing reliable, high-quality audio distribution.

Houses of Worship

Distribute audio between the main worship hall, overflow rooms, recording systems and control areas. Dante™ networking makes future system expansion easier without requiring extensive new cabling.

Bars, Restaurants and Hospitality Venues

Route background music, live audio and paging signals between different areas through a single network infrastructure. Each zone can receive the required audio source with flexible digital routing.

Retail Stores and Shopping Environments

Create centrally managed audio distribution for background music, announcements and promotional content across multiple departments or zones.

Clubs and Entertainment Venues

Transfer digital audio between DJ equipment, mixers, amplifiers and processing systems with low latency and consistent 48 kHz / 24-bit sound quality.

Multi-Zone Commercial Installations

Integrate compatible AUDAC amplifiers into larger Dante™ or AES67 networks, enabling flexible signal sharing between floors, rooms, buildings and different AV systems.

Why Choose the AUDAC ANI44XT?

The ANI44XT is ideal for system integrators and AV professionals who need to connect compatible AUDAC WaveDynamics™ amplifiers to a modern networked audio system. It delivers reliable 4×4 bidirectional audio, low-latency performance and broad compatibility while reducing cable requirements and simplifying future expansion.

Important: The ANI44XT is an internal installation module, not a standalone Dante™ converter. Amplifier compatibility should be confirmed before ordering, and installation must be performed by a qualified technician.